Hi Guys.....Anyone out there know where we could get a knob for the heat output on the control panel for a Whitfield Advantage III? It's the old control board. I've done a search on google and can't find anything. Thanks all.....
Whitfield Advantage III
- Thread starter shafer14
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
shafer14 said:
If you just need a knob to fit a pot, check out your local Radio Shack they used to carry such things see it is part of an electronics package.
If they don't have one that fits I'm certain they can steer you to a place that does.
I went to my local ACE hardware store and bought a nice little knob that has a set screw in it.
I had to enlarge the hole slightly so it would fit the shaft on the rotary switch.
My Whit came without a Knob (used) P O had been using a Pliers
hh:
That's the easy way.
Good luck
I had to enlarge the hole slightly so it would fit the shaft on the rotary switch.
My Whit came without a Knob (used) P O had been using a Pliers
hh: That's the easy way.
Good luck
- Status
Similar threads
