Wood heater/chimney

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

Kezza

Member
Apr 17, 2022
6
Australia
Hi all, am hoping for some opinions. Looking at purchasing a home that was built approx 1980, it was originally built with open fire in loungeroom and some kind of wood burner stove in kitchen both back to back connecting to brick chimney. At present it has just the alcove in kitchen after Reno's and a electric oven there, in loungeroom there was a free standing wood heater ,possibly around or just prior to 2017, inserted to where open fire was. Two story home. Brick chimney on roof has four pieces sticking out one I believe is the flu for the current wood heater and the other three are from previous, I don't believe any checks etc have been done for years. On second story in a closet brick chimney is there with missing bricks. On level one at wood heater I stuck my phone in to try to get photo of set up and it appears to have asbestos I reckon sectioning off the chimney with the flu pipe going up through it to the roof, it's broken hanging down and it looks like like have a white laminated stick of chipboard standing from top of wood heater to asbestos supporting the asbestos from falling down, it's disturbing to say the least Even the door of wood heater appears to have no rope seal in bottom half of glass in door. But I'm more concerned about the set up. Looking at the top of chimney from outside the home the size of the top of the flue is much smaller in circumference to to actual flue pipe that starts at top of wood heater, have they connected half way up a smaller flue pipe to the larger one? I was just hoping for some opinions , I am planning to get a pro out to do a complete check and report but just wondering how dodged this all is looking , thankyou so much for your time
 

Attachments

  • [Hearth.com] Wood heater/chimney
    IMG20250524121012.webp
    278.3 KB · Views: 19
  • [Hearth.com] Wood heater/chimney
    Screenshot_2025-05-24-15-14-23-70_99c04817c0de5652397fc8b56c3b3817.webp
    46.4 KB · Views: 16
  • [Hearth.com] Wood heater/chimney
    Screenshot_2025-05-24-15-14-33-36_99c04817c0de5652397fc8b56c3b3817.webp
    47.7 KB · Views: 11
  • [Hearth.com] Wood heater/chimney
    Screenshot_2025-05-24-15-14-57-25_99c04817c0de5652397fc8b56c3b3817.webp
    139.4 KB · Views: 11
  • [Hearth.com] Wood heater/chimney
    IMG20250524122003.webp
    238.4 KB · Views: 13
  • [Hearth.com] Wood heater/chimney
    IMG_20250523_142034.webp
    137.9 KB · Views: 21
Yes, you need to get a qualified inspector out there. You could get an insert (wood or pellet). That wood stove could be used elsewhere
if it can pass inspection.
 
  • Like
Reactions: Kezza
Might just be an optical illusion. 6" stove liner looks small from a distance when compared to a massive chimney. Getting pro eyes on the scene to check it out is a good plan. If the goal is to heat with wood, the stove will need dry, fully seasoned firewood.