Wow, a wood stove with dual exhaust! ! !

[Don2222]

Hello

I did drag racing at NE speedway and having dual exhaust with glass pack mufflers was noisy but quick!

Not sure if a dual exhaust wood stove with 2 magic heats performs better but take a look! What do you think? It must burn like a house of fire?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[n3pro]

Have to say, never seen that before. The amount of work he put into modifying the stove seems absurd. Surprised he didn't just weld another stove on top and make a double stove.

 

[claydogg84]

He's very creative. I like how he borrowed the air intake idea from the older Vermont castings stoves.

 

[billb3]

Why am I not surprised he has a backup for his Y2K backup generator ?

Maybe he could mill and polish a giant magnifying lens for that TV ?

That said, I like the bimetallic air control.
The magic heats, not so much.

 

[begreen]

A lot of crap that all could be replaced by a decent stove. A 30NC probably would do the same job and cost less.

 

[BrotherBart]

Looks like something you need to try on a pellet stove Don. Replace the combustion blower with a Roots blower.

Put us in the will.

 

[maple1]

All kinds of interesting in that one.

 

[Huntindog1]

Looks Like he had alot of fun.

 

[EatenByLimestone]

He's very creative. I like how he borrowed the air intake idea from the older Vermont castings stoves.

He's pretty handy at fabrication too. It makes me wonder why he didn't build his own stove to begin with. It's not like that sovereign is going to function anyway near the way it was designed to anyway.

 

[tarzan]

There's no way that guy was going to leave well enough alone. I'd bet there's lots of neat stuff around his house.

 

[Don2222]

Looks like something you need to try on a pellet stove Don. Replace the combustion blower with a Roots blower.

Put us in the will.

Hey BB
Dane Harman designed dual room blowers in his new P52i pellet insert so each blower could run slower and the over all decibel level is less than one blower running at a faster RPM. In the case of a pellet stove exhaust blower a dual blower system would keep the flame and the exhaust path much more symmetrical from side to side for a better burn in the burn pot and by increasing the RPMs you could get some high BTU output as long as there is no melt down It may require dual OAKs and double augers but that would be like the Holy Dual Feed double pumper carb and Edlebrock high rise intake manifold I used to win my trophy at NE Speedway in Epping NH in my younger days! Sunday ! That would be some bio burner!! Like make a Harman P61 into a Harman P222 or with two dual intakes a 4 speed fan 4 barrel intake with dual exhaust - 442 What do you think?

 

[kennyp2339]

I agree with Tarzan, bet there's plenty of neat things going on in that house, the one thing that I laughed about was after he was done showing the two magic heaters he made mention of his current flu temps, the were hovering around the 400 deg mark which is what my stove does, maybe he's one of those men that are ahead of there time with the apt crude engineering brains.

 

[Lockpicker]

Like it. Why am I not surprised some mention he should have just bought a new stove.

 

[Wildo]

It's not real dual exhaust! You had me all psyched for a second.


It is cool nonetheless especially if it works.