benp
Member
I picked up a new trailer this spring from a local builder.
The axles/bearings/hubs are for a snowmobile trailer. 2200 lb and 80 mph speed rated.
25" atv tires. The trailer tracks in the wheeler tracks. It just floats along. Even when loaded.
16" of ground clearance.
Popple deck and pine sides. Milled by them. Removable back tailgate.
When I got it, the wood was in the raw. So I sassed it up with some leftover stain.
After I made some make shift mud flaps from a half of a dump truck flap.
Maiden trip out for some blowdown Elm. Scrounging for some end of the year wood.
Some blow down Maple.
I really like the trailer and it does very well. Even when loaded down. The popple bed wears like iron. Once swept out you cant tell I hauled anything.
I want to weld some eyes onto the sides so I can use straps to secure loads.
The axles/bearings/hubs are for a snowmobile trailer. 2200 lb and 80 mph speed rated.
25" atv tires. The trailer tracks in the wheeler tracks. It just floats along. Even when loaded.
16" of ground clearance.
Popple deck and pine sides. Milled by them. Removable back tailgate.
When I got it, the wood was in the raw. So I sassed it up with some leftover stain.
After I made some make shift mud flaps from a half of a dump truck flap.
Maiden trip out for some blowdown Elm. Scrounging for some end of the year wood.
Some blow down Maple.
I really like the trailer and it does very well. Even when loaded down. The popple bed wears like iron. Once swept out you cant tell I hauled anything.
I want to weld some eyes onto the sides so I can use straps to secure loads.