just installed a new regency gc160 insert
- Thread starter joedirt
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
tpme06
New Member
velvetfoot
Minister of Fire
Attachments
Ram 1500 with an axe...
Minister of Fire
pretty good!..brochure says 55btu it will cook us out of the living room in about 30 min!!...i keep the celing fan on reverse in the kitchen and have a small office fan going in the living room
i picked up a ton of golden fire pellets made by bear mtn,..should i consider these premium pellets and put the stove on that setting?..or are these pellets not considerd premiums?..
Hi! ;-) you love your stove and mine is driving me nuts! We bought the same stove 1 month ago and cannot get it to heat consistently... Did you install the air intake? We have not. Our setting is on hi/lo stove is on 5 and it's barely 70 in the room the stove is in. Other times at the same setting it's 85!
handymanCT
Member
This stove rocks as I've said before. Throw anything in it and it will run forever. It will heat my whole first floor living area with ease on setting 3. Anymore then that and it will bake you out of the house.
Our home is 2300 square feet and it won't heat the 1st floor! :-( Are you using the wireless remote with yours? We tried. It was suggested we turn it on but not set a temp. Still no luck.
I do not know if he used a gauge to set the pressure. It's hard to really get a straight answer from them. Do you have an air intake?
I do not know if he used a gauge to set the pressure. It's hard to really get a straight answer from them. Do you have an air intake?
handymanCT
Member
my home is roughly the same size. I have no air intake installed (OAK). I was using a skytech 5301p, just changed to a Venstar touchscreen.
I would try putting the stove in manual mode and you turn it on and set it to some setting and see if it heats the way its supposed to.
I've seen issues with thermostats or bad connections cause this problem.
I would try putting the stove in manual mode and you turn it on and set it to some setting and see if it heats the way its supposed to.
I've seen issues with thermostats or bad connections cause this problem.
Ram 1500 with an axe...
Minister of Fire
Relax, play with it a. Little bit, it will come along, just have patience, love the Orchids, culinary?
- Status
Similar threads
