I'm relatively new to the pellet world and have a question about my PC45...
It seems to be heating quite well but occassionally when I look inside the ash and burnt pellets doesn't seem to be moving off the burn pot into the ash can. It seems to be piling up and gets about 1 1/4" or a little deeper. When I scrape it into the ash can there are some pellets in the pile that aren't burnt all the way..
I have been adjusting the feed rate with each bag, to try and get the best burn out of them.. Usually I run it around 2 with adjustments around 1/4 to 1/2 and the room temp around 70. I'm burning wood pellets exclusively..
Is this a normal thing to keep and eye on? Or am I missing something with how I'm running it?
Thanks for your help!
It seems to be heating quite well but occassionally when I look inside the ash and burnt pellets doesn't seem to be moving off the burn pot into the ash can. It seems to be piling up and gets about 1 1/4" or a little deeper. When I scrape it into the ash can there are some pellets in the pile that aren't burnt all the way..
I have been adjusting the feed rate with each bag, to try and get the best burn out of them.. Usually I run it around 2 with adjustments around 1/4 to 1/2 and the room temp around 70. I'm burning wood pellets exclusively..
Is this a normal thing to keep and eye on? Or am I missing something with how I'm running it?
Thanks for your help!