3 y.o. Englander for $300 in MASS

Xena Posted By Xena, Apr 12, 2008 at 1:54 AM

Thread Status:
Not open for further replies.
  1. Xena

    Xena
    Minister of Fire 2.
    NULL
    

    Nov 30, 2005
    2,494
    92
    Loc:
    South Shore MA
  2. stoveguy2esw

    stoveguy2esw
    Minister of Fire 2.
    NULL
    

    Nov 14, 2006
    6,182
    1,096
    Loc:
    madison hgts. va
    at a glance i'd say its had been run pretty hard and not maintained very well (when you've seen as many of these stoves as i have you tend to learn what to look for) still if its hull is in good shape (should be) nad the motors work as they should its not a bad buy. it definately needs gaskets , looks like the hopper lid gasket is missing and thats a must to run the unit. looking at the glass i'd say the heat exchangers are pretty well plugged up ( put the unit in diagnostic and run the exhaust blower , then blow the unit out with high pressure air to completely clear the unit and that shouldnt be a problem)

    i'd say it needs work but its still a decent buy providing everything works, and look at it this way , you would still have me for tech support (hope that doesnt blow the sale for the guy "lol" )
     
  3. backpack09

    backpack09
    Minister of Fire 2.
    NULL
    

    Sep 10, 2007
    554
    7
    Loc:
    Rochester, Mass
    In my olde home towne too....
     
Thread Status:
Not open for further replies.

Share This Page