1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)
    Caluwe - Passion for Fire and Water ( Pellet and Wood Hydronic and Space Heating)

Earth Stove Damper Thermostat

Post in 'The Hearth Room - Wood Stoves and Fireplaces' started by Mr Chips, Dec 15, 2009.

Thread Status:
Not open for further replies.
  1. Mr Chips

    Mr Chips Member

    Joined:
    Dec 15, 2009
    Messages:
    7
    Loc:
    Western CO
    HI to all. I'm new on this forum but I've been a wood burner for quite a few years. I searched the forum for this info but came up empty.
    Does anyone know where to get a replacement bi-metal thermostat for the Earth Stove 100 series?
    Thanks.

    Helpful Sponsor Ads!





  2. Crabby

    Crabby Member

    Joined:
    Nov 13, 2007
    Messages:
    124
    Loc:
    Ohio
    i had an earth stove 100 series. good stove. I dont think you can buy parts for them anymore unless you know someone or can find one cheap that is junk. what happend to yours the spring break?
  3. MurphyMacmanus

    MurphyMacmanus New Member

    Joined:
    Sep 2, 2009
    Messages:
    10
    Loc:
    east coast
    Find a local lennox dealer. If they call Lennox with the model number they will still make/have bunch of different replacement parts. Lennox bought earth stove
  4. Mr Chips

    Mr Chips Member

    Joined:
    Dec 15, 2009
    Messages:
    7
    Loc:
    Western CO
    Crabby and Murphy,
    This stove belongs to the lady down the road although I have one just like it in the garage and I bought my first model 100 back in 1978. Always liked these. The spring thermostat on the neighbors is bent or distorted because someone in the past had bent the close "STOP" out of the way ...for some reason...allowing too many degrees of turn or too much travel of the knob. This distorted the spiral shape although it still works, just not as good as it should.
    I've been on the web looking at different dealer parts including Lennox. It seems they all carry parts for newer models. But maybe a phone call or two is in order here.
    Thanks
  5. Stephen in SoKY

    Stephen in SoKY Feeling the Heat

    Joined:
    Nov 20, 2008
    Messages:
    333
    Loc:
    Southern Kentucky
    Any chance a replacement from Blaze King, US Stove or Hitzer could be adapted to work?
  6. Mr Chips

    Mr Chips Member

    Joined:
    Dec 15, 2009
    Messages:
    7
    Loc:
    Western CO
    Stephen,
    I don't know about that.....I've been to a bunch of sites that sell parts for different manufacturers and haven't seen even one bimetal thermostat as a replacement part. Good suggestion............thanks.
Thread Status:
Not open for further replies.

Share This Page