Recently replaced the vaccuum switch on my FPI, and since re-firing, the room fan won't shut off even when the stove is completely cooled down. any ideas?
Enviro Empress FPI combustion fan
- Thread starter davevassar
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
heat seeker
Minister of Fire
Whatever senses the stove is up to temp may be defective, or its wiring. It may be a snap switch or thermocouple; I'm not familiar with your stove. If you have a snap switch, try taking one wire off of it (with the stove unplugged), then try. If the fan doesn't run, you've found your problem. Also check for pinched/chafed wiring in the area you were working in, since the problem occurred after your work.
Here is a copy of the Teck Manual
see pages 44-45 for trouble shooting
https://enviro.com/custom_content/docs/manuals/C-12145 Instruction PELLET Service Manual.pdf
see pages 44-45 for trouble shooting
https://enviro.com/custom_content/docs/manuals/C-12145 Instruction PELLET Service Manual.pdf
Similar threads
