Hart and Cooley TD model stove pipe info

jdscj8 Posted By jdscj8, Oct 15, 2010 at 5:24 PM

Thread Status:
Not open for further replies.
  1. jdscj8

    jdscj8
    Member 2.
    NULL
    

    Feb 19, 2009
    128
    0
    Loc:
    Eastern,Nebraska
    Last January a few pieces of our pipe was damaged from a tree and windmill coming down. When tring to replace the pieces we found out they quit making the model TD class A and its imposible to find, and the new model TLC class A would not interchange.

    Now after 9 months later searching the web and talking to everyone at hart and cooley, i finally talked to one of there tech guys that knew what he was talking about, and that it will interchange.

    They have a male end adapter if you want to add to the top of your old model TD pipe with the new TLC model pipe, and if you have to replace a bottom piece or your clean out T then the new TLC model pipe will just snap into the bottom of your TD model pipe and you put some screws in it, slide the locking ring down and your done.

    Everyone i talked with tried selling me all new pipe, so i think thats why they said it would not enterchange, but who knows, thats just my view. Just wanted to pass this info on, i know theres alot of people out there using this pipe. JD
     
  2. webbie

    webbie
    Seasoned Moderator 2.
    NULL
    
    Staff Member

    Nov 17, 2005
    12,190
    1,086
    Loc:
    Western Mass.
    Thanks for the info! It is now saved for history and people searching the net should be able to find your post!
     
  3. BaliMawr

    BaliMawr
    New Member 2.
    NULL
    

    Jan 20, 2014
    4
    0
    Loc:
    Spotsylvania, Virginia
    JD- I am retrofitting a model TD chimney and need to replace/add a few pieces. This is great information, but I was wondering- were you successful in actually finding these adapters? I'm having a heck of a time finding a retailer, and don't want to re-enact your 9 month quest unnecessarily. Any more information would be greatly appreciated! Thanks!
    -Josh
     
Thread Status:
Not open for further replies.

Share This Page