I have a VistaFlame VF 100 stove.
Ok, here’s my problem:
Had a power surge which shorted out my igniter so that when I would start the stove it would almost instantly blow the fuse in the control board. Yeah, lesson learned on having my stove plugged into a surge protector.
So, I got the new igniter, got it all installed, started the stove up. No blown fuse, pellets fell in the burn plate, it all heated up, got a flame, things seemed great.
About 10 minutes after that I started smelling smoke. Go to the stove, it’s shut off and smoke is pouring out of the air intake pipe.
Now the stove won’t turn back on. Not at all.
I had ordered the stove from www.stovesandspas.com, and they've been not as helpful when it comes to support, especially considering they are in a different time zone and apparently only have one technician (that gave me wrong directions to begin with). Also, several of the "local" dealers listed on their website are either out of business or have never heard of VistaFlame.
Please help!
Ok, here’s my problem:
Had a power surge which shorted out my igniter so that when I would start the stove it would almost instantly blow the fuse in the control board. Yeah, lesson learned on having my stove plugged into a surge protector.
So, I got the new igniter, got it all installed, started the stove up. No blown fuse, pellets fell in the burn plate, it all heated up, got a flame, things seemed great.
About 10 minutes after that I started smelling smoke. Go to the stove, it’s shut off and smoke is pouring out of the air intake pipe.
Now the stove won’t turn back on. Not at all.
I had ordered the stove from www.stovesandspas.com, and they've been not as helpful when it comes to support, especially considering they are in a different time zone and apparently only have one technician (that gave me wrong directions to begin with). Also, several of the "local" dealers listed on their website are either out of business or have never heard of VistaFlame.
Please help!