1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)

New to Everything, any assurances?

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by Melissa220, Aug 13, 2012.

  1. DexterDay

    DexterDay Guest

    There is a tag on the back, side, or possibly inside the hopper, that has the UL listing tag on it.

    Yes, it is UL approved/tested...

    Helpful Sponsor Ads!





  2. Melissa220

    Melissa220 Feeling the Heat

    Joined:
    Aug 10, 2012
    Messages:
    349
    Loc:
    central ME
    Sweet! I will check for that thank you. The only immediately visible label on the stove itself only referenced the O-TL testing.
  3. DexterDay

    DexterDay Guest

    OTL is who UL listed the stove its O-T-L (Omni Test Laboratories)

    Its a tag that looks like this, right?

    2012-08-22_17-27-41_670.jpg
  4. Melissa220

    Melissa220 Feeling the Heat

    Joined:
    Aug 10, 2012
    Messages:
    349
    Loc:
    central ME
    Mine looks like this which I believe is same? IMG_20120822_205540.jpg The O-TL is in the upper left hand corner. This label is on the outside back of the hopper near the top.
    Darn insurance companies make you jump through hoops!
  5. imacman

    imacman Guest

    Did you check in the owners manual? Sometimes it's listed there.
  6. Melissa220

    Melissa220 Feeling the Heat

    Joined:
    Aug 10, 2012
    Messages:
    349
    Loc:
    central ME
    Hi Imacman - the only labels on my stove and manual referencing any testing are those of O-TL. Their 'mark' indicates both Canada and US and its tested - also according to the label and manual - to ULC. My research on this indicated this is UL Canada; and further research indicated that ULC and UL now work hand-in-hand.

    I just this morning have sent an email to customer service at OMNI asking them to help me understand the labeling as my insurance company is looking for UL approval.
  7. AWaeschle

    AWaeschle New Member

    Joined:
    Sep 25, 2012
    Messages:
    2
    Loc:
    Belvidere, NJ
    Hi! New owner of Harman P43 here too ... thank you Melissa for starting this thread ... answered a lot of questions that I had too! Question to other Harman owners - do you typically use the "room" or "stove" temp setting, and if using the "stove" temp setting what do you typically set yours at? We purchased the pellet stove to offset our heating oil costs ... I know the heat won't get to all parts of the house, however I did a test run the other night and used "stove" temp setting at around 75 deg ... room that it was in and adjacent rooms were sweltering and we burned through the bag of pellets pretty quickly. I know this will be trial and error for us too ... but any advice on settings/temp and any tricks you can offer would be appreciated. Thanks everyone! Looking forward to learning a lot here!
  8. mepellet

    mepellet Minister of Fire

    Joined:
    Aug 10, 2011
    Messages:
    2,053
    Loc:
    Central ME
    I use room temp set in manual mode 90% of the time. I use stove temp auto if coming home to a cold house and set it in the 5 range for an hour or two and then go back to room temp manual.
  9. The Ds

    The Ds Feeling the Heat

    Joined:
    Jan 29, 2012
    Messages:
    337
    Loc:
    Western PA, USA
    Hi AWaeschle, and welcome to the wonderful world of pellets :)

    You'll get more response to your question if you start a separate thread. I think yours will get lost down here on page 6 of Melissa's thread. Start something new and you'll get lots of advice. We pellet folk are very helpful!! LOL Best of luck, and enjoy the heat.
  10. Melissa220

    Melissa220 Feeling the Heat

    Joined:
    Aug 10, 2012
    Messages:
    349
    Loc:
    central ME
    I tested my stove yesterday when was leaving the house for a few hours. I started the stove in auto and brought the rooms up to temp - about 70. When I got ready to leave, I set the stove on room temp 65 and switched to manual so the stove would not turn off but go to its lowest setting. I turned on a fan set up high on a bookcase to keep air moving to the other rooms of the house on the first floor. When I got home 4 hours later, all rooms on the first floor were a comfy 70 degrees. Not being able to turn of, the temp in the room is likely to be a bit higher than the set temp.
  11. Gman12

    Gman12 Member

    Joined:
    Sep 16, 2011
    Messages:
    71
    Loc:
    Rutland, MA
    Welcome Melissa, Harmon Pellet stoves are great stoves! Hope you enjoy it this winter and many more to come.
  12. Harman Lover 007

    Harman Lover 007 Minister of Fire

    Joined:
    Dec 31, 2010
    Messages:
    1,493
    Loc:
    Eastern Mass & Lakes Region of Maine
    AWaeschle and Melissa,
    If you haven't found it already, click on the link in my signature. It gives a complete overview of the Harman stove temp/room temp operation from another forum member/Harman owner, lbcynya. It's worth the read.
  13. Melissa220

    Melissa220 Feeling the Heat

    Joined:
    Aug 10, 2012
    Messages:
    349
    Loc:
    central ME
    Thanks!
  14. AWaeschle

    AWaeschle New Member

    Joined:
    Sep 25, 2012
    Messages:
    2
    Loc:
    Belvidere, NJ
    Yes thank you! I found it after I posted here ... great info!

Share This Page