So i picked up a whitfield advantage 2 off craigslist for a hundred bux... its my first pellet stove. When i plugged it in at home, i gave it a good vacuuming out/cleaning inside and out. I went to start a fire and noticed the auger wasnt turning... uh oh! i unplugged the blowers and i could hear the motor hum but no action. So i took the motor and gearbox out... plugged directly in to an old extension cord and hosed it down with gunk thrust starting fluid and pushed the motor with a toothpick for some encouragement and then zziiiiiip! the motor took off !! then i doused it with 3 in 1 household oil and put it back in my stove. now the augers workin great!!
Almsot too great!! in fact the pellets are feeding faster than it can burn em... (I think its bad pellets) so i cleaned everything out and started with new pellets... im watching it burn right now and it seems to be keeping up ... has a good flame ... blowers working great... good circulation.
But my damn damper is stuck.... i wanna free it up a bit so i can monkey with my flame and combustion a bit..... whats inside there hanging it up? I can get it to move barely but definately not freely. I have to clamp down with a pair of vice grips on it and tap em with a hammer to budge it.... whats goin on in there?
Thanks for your time!
Almsot too great!! in fact the pellets are feeding faster than it can burn em... (I think its bad pellets) so i cleaned everything out and started with new pellets... im watching it burn right now and it seems to be keeping up ... has a good flame ... blowers working great... good circulation.
But my damn damper is stuck.... i wanna free it up a bit so i can monkey with my flame and combustion a bit..... whats inside there hanging it up? I can get it to move barely but definately not freely. I have to clamp down with a pair of vice grips on it and tap em with a hammer to budge it.... whats goin on in there?
Thanks for your time!