Rika integra insert not feeding pellets

[Bill Kennedy]

I came home today to find the stove not running and showing the error code 0
Which I thought was for out of fuel , which it wasn't
The burn pot was full of unburned pellets
I cleaned the burn pot in the morning
Was running fine all day
When I tried to restart it seemed to start fine but the auger was not turning and no pellets newer being fed
Any help would be appreciated

 

[smwilliamson]

Check the auger bushing. Tell tale sign of a bad bushing is wood dust collecting under the auger. Lift the motor and look at the shaft where is basses trough the bushing, the bushing should be set in the plate and the shaft should spin inside of it. If there is any play in the bushing on the plate or if the bushing spins with the auger shaft...its bad.