I have been chasing a leak in my supervent chimney pipe installed this year, I finally found that it is leaking down the outside seam of the pipe has anybody else had this problem ? what did you do to fix it ? Thanks !
Selkirk supervent pipe leaking water down the seams ?
- Thread starter clambdin
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
My install leaked down a seam at first. The installer had only ran a bead of silicone halfway up the seam on the section of pipe that was in the attic and outside the roof above the storm collar. Finishing the bead all the way up the seam fixed the leak.
3fordasho
Minister of Fire
I had the same issue. Took some clear high temp silicon (500f) and ran a bead down the seams. Solved the problem so far.
- Status
Similar threads
