Vermont Casting Oval to Round question

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
H

homieg9999

New Member
Hearth Supporter
Dec 26, 2010
11
South Jersey Shore
Hey guys,

I'm new to the board, and getting ready to install a used 1980 VC Vigilant I picked up on CL. Besides some enamel chipping off due to surface rust, it looks to be in pretty good shape. I was looking online at the oval to round pieces and it seems most are 5 3/8" x 9 3/4" but I measured the hole on mine and it looks like it's 5 1/4" (probably 5 and 3/8") x 10 1/4". Am I measuring wrong, or do I have a different size opening?

Thanks in advance.

Lou
 
Status
Not open for further replies.

Similar threads

Dajolu
Flexible liner through 8x13 Clay liner
Replies
4
Views
913
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
S
How to build a half-round corner hearth pad
Replies
13
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
SasWalk
S
R
Cast Iron Non-Cat Stoves Available in 2024?
Replies
14
Views
895
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
H
Bluestone Hearth Pad question
Replies
0
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
Hawaiianlove821
H
6
VC 1910 stove pipe issue
Replies
3
Views
618
Vermont Castings
bholler
B
Top Bottom
Back