When emission levels say 2.0 g/hr, is that into the house or up the chimney (smoke)?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

DeanBrown3D

New Member
Hearth Supporter
Oct 16, 2006
193
Princeton, NJ
Sorry for the dumb question, but what does a stove's emissions level mean? Some number of grams of solid being release, does it mean into the house or up the chimney?
 
DeanB said:
Sorry for the dumb question, but what does a stove's emissions level mean? Some number of grams of solid being release, does it mean into the house or up the chimney?
In the flue gases.
 
Thats what goes up the chimney
 
epa emmissions listings are for the amount of solids in the "smoke" going up the chimney. these standards are set by firing the unit with a 15 lb. charge of douglas fir which is dried to a certain moisture content. this is the control that testing agencies are held to to ensure that the readings given are consistant from model to model , actual burning with full loads of wood will obviously vary from this standard because of various factors, but the epa particulate matter testing will show which unit is capable of producing the lowest amount of solids in its exhaust (which ties in nicely with the stoves ability to produce heat, the more of the wood itself that is consumed and not allowed up the flue the bigger the "bang for the buck" you will get per stick.

mike esw
 
Status
Not open for further replies.