- Sep 7, 2012
- 8
Hey guys I have an ms260 and I love the saw an it has run flawless for the past two years. I always use the stihl oil and super gas. I was running my saw today pinched the chain bad and the sawjust stopped like I hit the kill switch. Got the saw unstuck and couldn't get it to start. used the choke and it would start and idle but when I pull the trigger it would just die. I cleaned the filter even though I cleaned it before I used it then I pulled the carbs and cleaned everything. Got it running and had to mess with the L and H. It will now idle and run normal for a bit and then dies like it is starved of fule so I back off the trigger for a bit and roll it on to the clutch side and then it would go again and so on.
Questions are.
1could I have damaged the cylinder with the sudden stop?
2can the fuel pump just stop working like that diafram leak?
Any help would be great thanks
Questions are.
1could I have damaged the cylinder with the sudden stop?
2can the fuel pump just stop working like that diafram leak?
Any help would be great thanks