honeywell

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  1. R

    Need Honeywell Comfort Control Valve Remote Control RT8220A For Vermont Castings Fireplace

    I have an older model VC stove (DV580). This stove uses Honeywell Comfort Control valve system that was discontinued. I found some older threads about this issue on this forum. This stove uses the RT8220A remote control. I have attached a photo of it. It cannot be operated by a universal remote...
  2. C

    Thermostat settings for Quadrafire CB1200i and Honeywell Focus Pro 5000

    Have a CB1200i wired to a Honeywell FocusPro 5000. The thermostat is actually branded with the Quadrafire logo and everything. Once it’s wired up, the thermostat has to be programmed for fuel source, blower etc. Problem is, none of the combinations I’ve tried seem to work. Have called...
  3. A

    Honeywell WiFi thermostat won’t turn on Lopi pellet stove

    We connected the Honeywell WiFi thermostat with a VIIVRIA 24 V transformer, C wire adapter, to our Lopi AGP pellet stove. The thermostat will work to keep the stove on until it reaches the set temp, and will put the stove in cool down and off, but the stove won’t turn back on when temps drop...
  4. F

    Blower power intermittent, Majestic DV580 w/ Honeywell rf control valve

    We have a 17 year old Majestic/Vermont Casting DV580 propane fireplace with a Honeywell rf control valve. We have flame and no issues with the fireplace flame working or with gas flow, so now our concern is that there is something wrong with the control valve as the blower does plug into that...
  5. K

    Is it possible to use Honeywell YTL9160AR1000 to control Quadrafire

    I have a Quadra fire Classic Bay 1200 Pellet Insert. My electric baseboards are controlled by Honeywell YTL9160AR1000 Econnect Wireless Thermostat connected to the TLM1110R1000 relay and the Redlink Gagteway. Is it possible to use a 24 volt transformer and the relay to control the pellet stove?
  6. C

    Wiring a Wall Switch to a Honeywell RV8310 gas valve

    Hi, I purchased a house with a Lennox Spectra (LSS-40CN) that has a Honeywell RV8310E gas valve. Remotes for this unit are not longer available and I was hoping to wire in a wall switch to turn it on and off. Here is a link to the manual, Honeywells website seems to be under maintenance but I...