quadra fire castile

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
  1. C

    2004 Quadrafire Castile insert

    I’m at a loss here my friends. My Castile has had a series of issues. It was initially struggling/not feeding after initial start up and would wither out. I have bypassed and checked all 3 snap discs with no change. I have bypassed the vacuum switch as well as cleaned the tube, no change. I...
  2. F

    Quadra-Fire Castile FS Nuisance Shutdown

    Hello, currently working on a free standing Quadra-Fire Castile that keeps having nuisance shutdowns around the 20 minute mark. Stove will turn on and call for pellets at start up. Takes a few minutes for the flame to get going and sometimes will need to hit the reset button. Once the fire...
  3. etorres16

    Quadra-Fire Castile Not Working

    We moved into a new home last year with a Quadra-Fire Castile pellet stove. It worked great last winter, no issues other than occasionally needing to hit the reset button. This year, however, it has had issues feeding and igniting. The thermostat flashes "HEAT", the red call light comes on, and...
  4. M

    Quadra-Fire Castille call light on, nothing happening

    Hi all! I am new to the pellet stove world, we recently bought our house and the stove came with it. It was working great for about a month and a half and then it wasn't. When I turn it on, the exhaust starts up, the red call light comes on.. but then it just idles. I went through the manual...
  5. MacKay

    Quadrafire Castille problem. Any suggestions?

    i have a quadrafire castille insert. It's about 5 years old. It stopped feeding pellets. I pulled the auger motor and gave the stove a thorough cleaning. I then put a jumper between the leads on the vacuum switch and the auger functioned properly. I ordered a new vacuum switch and...
  6. M

    How do I replace fuse in Quadrafire Castile

    Hi! I was working on my quadrafire Castile this morning and cleaned the ash out and while pulling the ash holder out it caught the wires and caused them to arc. Fixed the wires but stove won't turn on. Figure it blew the fuse but don't know how to change it out. Any help would be great!
Top Bottom