And done! Just wanted to thank you guys. It looks amazing.
0 Vision would like your input...
- Thread starter Gotrek
- Start date
-
- Tags
- hearth pad advice
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Fired it up today to cure the paint and I'm thinking my installer put it too close to the wall. I think he measured 6.5" clearance from the firebox to the wall and looking at the manual I think it should of been 6" from the square box on the back(air intake?). I noticed above that box the wall was getting pretty hot (160 deg when running on high). So I'm not sure what I'm going to do. Either offset the chimney or maybe a heat shield/stove board. What do you guys think?
The air intake is ~3" from the wall at most.
The air intake is ~3" from the wall at most.
its on the remove eventually list 
Similar threads
