The stirrer bar is not moving. Haven't used stove for a year but furnace has a cracked heat exchanger and could take few days to replace. Any thoughts? Pressed air button and still no movement.
10CPM stirrer not moving
- Thread starter ghandy131
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Ssyko
Minister of Fire
Check and see if the stirrer is turned off. The Stirrer may be turned Off by pushing the “Air On” button on the bottom of the Control Panel, and then pressing both Down arrows on the “Blower Speed” and “Heat Range” until you see a “0” in the Blower Speed window. The Stirrer may be turned back On by pressing the “Air On” button on the bottom of the Control Panel, and then pressing both Up arrows on the “Blower Speed” and “Heat Range” until you see a “1” in the Blower Speed window.
was this stove plugged in the entire year and not being used? is it on a surge protector? had any power outages or spikes?
was this stove plugged in the entire year and not being used? is it on a surge protector? had any power outages or spikes?
Last edited:
Similar threads
