Howdy all, just signed in to what appears to be a great forum. Just picked up a used 2005 quadra fire and need to know if there is an "on off" switch that plugs into the bottom of the control panel. It is set up for a T-stat. Trying to get this one going. I have power going to 2 pins on the control box but no lights and no fire, so I started looking around and found the plug on the bottom for what looks like a switch, one of the female inserts looked like it got shorted out... any help would help....Mike
2005 Quadra fire on off switch
- Thread starter Mike from Idaho
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
![[Hearth.com] 2005 Quadra fire on off switch](/talk/data/attachments/254/254761-2350a7b91fa1c138d6522859f8ab81ee.jpg?hash=8WnGgqze_x)
![[Hearth.com] 2005 Quadra fire on off switch](/talk/data/attachments/254/254762-cd7278a65e26588b79e5e03a160642c5.jpg?hash=LDIx-qqNPC)
![[Hearth.com] 2005 Quadra fire on off switch](/talk/data/attachments/254/254763-0d7bc7ef1be871ef65027c6fed85ddf0.jpg?hash=lkX5XLqljS)
Do you know the age and model of your stove should be on the I'd plate. My stove won't be the same as yours. I just posted the pic for reference. We need to go to the wire harness schematic for your particular stove
it's an 2005 Santa Fe, I posted the photo of the code and date above in the photos. I do have a wiring diagram but it's for a different model. The guy I bought it from just downloaded it thinking it would be the same. The diagram I have does not show a switch nor does it show a jumper.... what color wires are they jumping, can you get a side photo so I can see the jumper and the wires coming out the back. What year and model is yours
This is the I'd plate. Mine was in the hopper. This is on all pellet stoves, unless somebody took it off.
![[Hearth.com] 2005 Quadra fire on off switch](https://www.hearth.com/talk/data/attachments/254/254808-80d724cc68214732e26524884452cfaf.jpg?hash=I_l5_FgRV3 "[Hearth.com] 2005 Quadra fire on off switch")
ok i took the jumper out and got a better pic. you can try this config, but I can't guarantee it is the same for your stove. mine is a 2000 cb1200
(Note the corners are keyed i marked with a sharpie)
![[Hearth.com] 2005 Quadra fire on off switch](https://www.hearth.com/talk/attachments/sam_1659-webp.254782/ "[Hearth.com] 2005 Quadra fire on off switch")
![[Hearth.com] 2005 Quadra fire on off switch](https://www.hearth.com/talk/attachments/sam_1660-webp.254783/ "[Hearth.com] 2005 Quadra fire on off switch")
(Note the corners are keyed i marked with a sharpie)
This harness is from an '01 Castile... Not sure if it helps or not
![[Hearth.com] 2005 Quadra fire on off switch](https://www.hearth.com/talk/data/attachments/254/254811-db7457a39ef27148ae8df686ec651d5e.jpg?hash=TocqJMm_s3 "[Hearth.com] 2005 Quadra fire on off switch")
PERFECT, Thank You.... it's a bypass for the T-stat... I think my control box is bad, there's a burnt spot on the male plug end of it as well as the burnt spot on that bypass plug. I ordered a new one so I'll have to wait till it shows up on wednesday, plug it in and see what happens..
that plug with the jumper is missing on mine.
I have that same schematic but it's not for the one I have. Mine is a Santa Fe... I really appreciate what you went thru to post these photos, I know it's not easy...
UPDATE.. The new control box arrived yesterday, I did all the procedures, added the ground wire, put the thermostat jumper in which was missing all together, plugged it in and everything worked mint.... Again, Thank You all for the help.. Now I have a $400 Santa Fe in my shop, very happy...
Similar threads
