8" vs 6" Flue collar on a VC 1977 Vigilant

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Defiant

Defiant

Vermont Castings Geek
Dec 5, 2007
2,128
Old Lyme CT
Has any one had any experiece with changing out the 8" flue collar for a 6" and burning this stove? We want to put on the 6" collar roughly 3 feet of pipe with one elbow and use a 6" to 7" increaser into a wall thimble (that is 7" clay) and into an 8"x8" tile chimney about 30' tall. I know using the fire screen will not work , any one see any issues.

Thanks Joe
 
An encore and new defiant work with 6", no one has any experience with this application?
 
Status
Not open for further replies.

Similar threads

MarineBob
Vigilant 6" round flue collar
Replies
10
Views
977
Vermont Castings & CDW Dutchwest older Models
MarineBob
MarineBob
J
What do I need to pass through drywall into a flue liner in a masonry chimney?
Replies
12
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
Drew777
D
T
Advice Needed Vermont Casting Vigilant 1980 - Replace or Adapt
Replies
8
Views
2K
Vermont Castings & CDW Dutchwest older Models
Dbredell
D
B
Classic case of being upsold, or actually an issue?
Replies
5
Views
1K
Vermont Castings
Woodsplitter67
Woodsplitter67
O
[Help] Wood stove pipe through new basement wall
Replies
18
Views
4K
The Hearth Room - Wood Stoves and Fireplaces
orangeisnon
O
Top Bottom
Back