Accentra distribution blower problem

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

thebigo

Member
Feb 11, 2012
29
live free or die
Tonight the distribution blower on our accentra stopped working. It will run at low speed but never picks up to max speed when the stove is hot. Have had a similar probelm in the past, solved it by placing some torque on the room temp knob slightly past the end point. Nothing is wokring this time. Fully cleaned the stove today, including scraping the burn pot, leaf blower on the exhaust, rear fines box and wiping down the ESP.

Unit is free standing, direct vent through the wall. Four years old, burning MWP.

The distribution blower light is on solid, stove builds a full flame.

Any ideas?
 
figured it out, somehow a pellet lodged itself in one of the blowers and was preventing rotation

glad it is running now but worried about damage to the motor, likely will have to replace in the near future
 
  • Like
Reactions: Big papa
All depends might be fine just keep an eye on it glad you got things going supposed to get pretty cold here in the north east this week
 
Status
Not open for further replies.