Forum User Hint acronyms and abbreviations common to Hearth.com

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here

webbie

Seasoned Moderator
Hearth Supporter
Nov 17, 2005
12,165
Western Mass.
Note - besides these hearth.com acronyms, there are a number of common internet ones which we assume you know! Examples include IMHO (in my humble opinion), LOL (laughing out loud) and many more. You can find lists of these elsewhere - some common ones are at the bottom of this list.

PE = Pacific Energy
VC = Vermont Castings
CDW - Dutchwest Stoves
LP = Liquid Propane (Gas)
DV = Direct Vent (gas or pellet, etc.)
BV = B-Vent (gas)
VF = Vent Free (gas)
NFPA=The National Fire Protection Association
UL = Underwriters Laboratories (testing lab)

MM = Moisture meter
OAK = Outside Air Kit
OP = Original post or original poster
CSD = Cut, split and delivered
RTFM = Read The Freaking Manual
BOTL = Be on the lookout
NG = Natural Gas
YMMV = Your Millage May Vary
CO = Carbon Monoxide (Bad)
CO2 = Carbon Dioxide
OWB = Outdoor Wood Boiler
HW = Hot Water
DHW = Domestic Hot Water
UPS = Uninterrupted Power Supply (battery backup)
CL = Craigslist
CSS-=cut/split/stacked
PPE - Personal protection Equipment.
WFO= Wood Fired Oven
WFO= Wide Flat Out, Wide Full Open


AFAIK = As Far As I Know
IMHO = In My Humble Opinion
FWIW = For What It's Worth
BTW = By The Way
OTOH = On the other hand


Please add yours below and I will add to this post later....
 
Last edited by a moderator:
Mag or Mag gauge = Magnehelic vacuum gauge
IIRC = If I Remember Correctly
 
WTF - WikiLeaks Task Force
 
  • Like
Reactions: PapaDave
I have a question I keep hearing the term shoulder pellets. I assume it means lower quality pellets? Am I correct? Or is there a better definition for this term.
 
FIL and MIL, father-in-law and mother-in-law, respectively.
 
I have a question I keep hearing the term shoulder pellets. I assume it means lower quality pellets? Am I correct? Or is there a better definition for this term.

Lesser heat quality pellets used in Fall and Spring usually because they are cheaper and not as much heat is needed.