Another way to use pallets for wood storage.

[oldspark]

(broken image removed)This guy loads the wood into the building with a tractor but I do like his method of stacking the wood.

 

[schlot]

Hmmm - that link didn't work for me

 

[Woody Stover]

Hmmm - that link didn't work for me

I see no jpeg. Is it posted in a forum?

 

[oldspark]

Yes, it works for me, let me see what I can do.

 

[Jack Straw]

What about this guy?


(broken image removed) Tree fell on my Iseki

 

[BrotherBart]

This is the pic.

(broken image removed)

 

[clemsonfor]

your link is dead, but i think i know what that is of, i remember that thread if memory serves me right. Just cant recall what the pic is of, but i am thinking its the guy with the older ford or massey that uses his tractor to rotate and move his wood around useing the rear forks and has pallet things built to hold wood? Maybe wrong. We get a few threads there a year dealing with wood and stoves over there.

 

[oldspark]

I am seeing both BB's and my picture now.

 

[Bster13]

(broken image removed)

 

[oldspark]

I get a red X from your post Bster 13

 

[Bster13]

What a pain, I uploaded it to another website:
(broken image removed)

 

[oldspark]

Three pictures are better then one.

 

[Dairyman]

What a pain, I uploaded it to another website:
(broken image removed)

Flyingcow's avatar?

 

[oldspark]

Interesting, never noticed it before, from a tractor site, he must be a member there.

 

[captjack]

i do the same thing but I built a 4Lx4Wx5T box out of scrap angle and used 3/4 inch plywood for sides - two of them gives me just a little over a cord in the garage at a time. I always over fill them

 

[Mr A]

i do the same thing but I built a 4Lx4Wx5T box out of scrap angle and used 3/4 inch plywood for sides - two of them gives me just a little over a cord in the garage at a time. I always over fill them

Pics? i'd ;like to see that. I usually cover a cord with a tarp outside, and bring half cord into the garage and cross stack it. Can't wait to start burnin' in a few months!

 

[Backwoods Savage]

Interesting that those pictures did not show up for most folks, including me. The only picture I see is the one that Bster posted.

 

[oldspark]

Yea all red X's for me now, they were all there earlier today.

 

[bogydave]

Interesting that those pictures did not show up for most folks, including me. The only picture I see is the one that Bster posted.

Same here. no pictures

Hackers ?

 

[Mr A]

(broken link removed) I just right clicked and then copy image, for this post. It looks fine on my end. (broken image removed)

 

[swagler85]

I played around with a few different versions of this. Used a pallet and built a small rack over it because it looked better then three pallets. But ultimately went back to exactly what these are. They do a great job of holding the splits in there when I moving around. My forks are on my three point so I can't stack two high but still love the pallets. It really cuts down on handling splits. Split and stack straight into the pallet and never touch the split again until I'm carrying it from the porch to the stove. I have three cord of regular stacks left from two years ago then I'm all set with just these pallets.