Anyone have any tips or tricks to getting the most out of your avalon? I feel like I have yet to tap into the potential of a clean burn high heat that I am sure exists. I can't seem to get the hang of the draft not to mention changing it per heat setting and pellet variety... I also have am curious if I am expecting to much from my stove. I have a two story house with a small addition. He do not heat the upstairs as it is under renovation. The stove is in the living room. The stove on medium keeps the living room in the 80's and a bedroom off of the living room around the same temp. The kitchen is quite a bit cooler but the addition is at least 20-25 degrees cooler. I have a propane space heater in there now which I have to occasionally fire up. I have a doorway fan that sends air into the kitchen from the living room and a fan pushing air from the adjacent bedroom into the addition. the entire house is a little over 1500 sqf I estimate I am only heating about 1100 sqf or so. Should I expect my stove which is rated to heat more than that to keep my house a more consistent heat? looking for some guidance
Thanks!
Love the forum!
Thanks!
Love the forum!