Have been burning for a week or so.
Start a fire in the AM, with a 2/3 full box it burns about 24 hours just a few hot embers left next AM.
House in the 70 °f range. (some days it gets too warm & we open a few windows in the afternoon)
Damper setting on 1.5
When I start the new fire in the AM, get the "Cat" active & close the bypass,
after about an hour, I see a few flames in various places, on the bottom around the door seal.
Book says to turn the door latch to tighten, but one full turn seems to be to tight. I'm afraid Ill over tighten & stress the door (glass door)
I was going to try to bend the 90° "L" in just a scoosh. (take it off, put in a vise, bend with a wrench)
2nd year with the BK King, 1107 , Cat, blowers. (will be 1st full winter)
May be a non- issue, seems to be pretty small air leaks, may just leave it alone.
Leave it alone, tweak just a bit, 1 full turn on the adjustable latch???
Start a fire in the AM, with a 2/3 full box it burns about 24 hours just a few hot embers left next AM.
House in the 70 °f range. (some days it gets too warm & we open a few windows in the afternoon)
Damper setting on 1.5
When I start the new fire in the AM, get the "Cat" active & close the bypass,
after about an hour, I see a few flames in various places, on the bottom around the door seal.
Book says to turn the door latch to tighten, but one full turn seems to be to tight. I'm afraid Ill over tighten & stress the door (glass door)
I was going to try to bend the 90° "L" in just a scoosh. (take it off, put in a vise, bend with a wrench)
2nd year with the BK King, 1107 , Cat, blowers. (will be 1st full winter)
May be a non- issue, seems to be pretty small air leaks, may just leave it alone.
Leave it alone, tweak just a bit, 1 full turn on the adjustable latch???