Can anyone ID this PE Insert?

[williaty]

New house, new stove questions.

One room has a masonry fireplace that's been converted with a wood stove insert. The small label in the corner says Pacific Energy. Can anyone ID the model so I can get a manual for it? Anyone know if it happens to be any good or if there's anything I need to know about it (only prior experience is with an Ideal Steel, for reference).

 

[begreen]

Looks like a Summit. Not sure which one, but would guess a Summit C. It's an excellent heater. You lucked out.

 

[Tech Guru]

Add a shot of the interior. But if the baffle tube (the rectangular tube that feeds air into the baffle) is centered between the rear bricks it would be a Summit, if the baffle tube is offset to the right, then that would make it a Super 27.

 

[GG Woody]

That looks nice!
Looks much like ours... but nicer...
It's a pretty serious heater for it's size, the fan moves a lot of heat!

 

[begreen]

I'm pretty sure it's a Summit based on the visuals of the side panels and ash lip but it wouldn't hurt to verify with the firebrick pattern.

 

[williaty]

OK, I'll try to remember to snag an interior pic when I'm up there tomorrow. Gonna try to call PE too.

 

[williaty]

Turns out that you *can't* call PE as they don't have a phone number for the public to use. That's a big red flag to me.

I pushed and pulled at the surround/blanking plate to try to get it to come off to invesitgate if there's a label behind it, but I couldn't figure out how to get it free. Wasn't willing to try to force it without having instructions for exactly how to remove it.

I took some pictures of the inside of the firebox for you guys but I don't have real internet here yet so I'll upload them once I get back to my old house.

 

[Wisco Shepherd]

Turns out that you *can't* call PE as they don't have a phone number for the public to use. That's a big red flag to me.

I pushed and pulled at the surround/blanking plate to try to get it to come off to invesitgate if there's a label behind it, but I couldn't figure out how to get it free. Wasn't willing to try to force it without having instructions for exactly how to remove it.

I took some pictures of the inside of the firebox for you guys but I don't have real internet here yet so I'll upload them once I get back to my old house.

 

[williaty]

View attachment 343600

I already contacted them that way about a week ago and they haven't replied. I spoke to a PE dealer today who said "yeah, you're not going to get a reply. They don't like talking to customers. You have to go through your dealer".

 

[Gearhead660]

New house, new stove questions.

One room has a masonry fireplace that's been converted with a wood stove insert. The small label in the corner says Pacific Energy. Can anyone ID the model so I can get a manual for it? Anyone know if it happens to be any good or if there's anything I need to know about it (only prior experience is with an Ideal Steel, for reference).

View attachment 343233

Looks alot like a PE Super insert.