CL deal of the day

[Danno77]

And in my town of all places!!

(broken link removed to http://quincy.craigslist.org/grd/2661859826.html)

Poulan Wood Shark Model 1950 with 14 inch bar. New Bar, New Chain, New Spark Plug, and $30. cost to rebuild Carburetor and it still don't start.
First one with $50 cash. call XXX-XXX-XXXX

Location: Hamilton
it's NOT ok to contact this poster with services or other commercial interests

 

[smokinj]

And, another 30 hrs trouble shooting and you can re-list the saw using the same add! Hes saving you some time there. ;-)

 

[wkpoor]

And, another 30 hrs trouble shooting and you can re-list the saw using the same add! Hes saving you some time there. ;-)

hahaha you got it.
I would bet money its scored and has no compression.
And if that is not it then it needs a module that costs more than the saw is worth.

 

[Danno77]

And, another 30 hrs trouble shooting and you can re-list the saw using the same add! Hes saving you some time there. ;-)

hahaha you got it.
I would bet money its scored and has no compression.
And if that is not it then it needs a module that costs more than the saw is worth.

I was guessing it was one of tose two things as well.

LoL, Jay! Funny thing is that I swear I saw this ad in the neighboring town a few weeks ago. I should go back and look!

 

[wkpoor]

If your looking for a CL ad saw I would be looking to pick up a pro saw (ie. MS361, 5100S, 5105, 346NE, 357). They will be typically just as cheap and more worth fixing and or have something when your done.

 

[Danno77]

If your looking for a CL ad saw I would be looking to pick up a pro saw (ie. MS361, 5100S, 5105, 346NE, 357). They will be typically just as cheap and more worth fixing and or have something when your done.

K, lol, thanks? I hope you don't think I was looking at really getting this. A new one can be had for probably 75 bucks on eBay if I thought I needed one.

 

[ISeeDeadBTUs]

If your looking for a CL ad saw I would be looking to pick up a pro saw (ie. MS361, 5100S, 5105, 346NE, 357). They will be typically just as cheap and more worth fixing and or have something when your done.

Someone finds a good 660 for $50, let me know. Finders fee in it for ya :smirk:

 

[smokinj]

If your looking for a CL ad saw I would be looking to pick up a pro saw (ie. MS361, 5100S, 5105, 346NE, 357). They will be typically just as cheap and more worth fixing and or have something when your done.

Someone finds a good 660 for $50, let me know. Finders fee in it for ya :smirk:

Found one :cheese: but its not on the list.

 

[BrotherBart]

I have used a 1975 for a limbing saw for over ten years. Like the little sucker.

 

[Thistle]

The older ones are so much better,most after 1995 are crap,just like the last McCullochs were.

 

[BrotherBart]

The older ones are so much better,most after 1995 are crap,just like the last McCullochs were.

This one puts'em on the ground so the little green guy can limb'em.

 

[wkpoor]

If your looking for a CL ad saw I would be looking to pick up a pro saw (ie. MS361, 5100S, 5105, 346NE, 357). They will be typically just as cheap and more worth fixing and or have something when your done.

Someone finds a good 660 for $50, let me know. Finders fee in it for ya :smirk:

I've seen saws that cheap in the 3cube size. Finding a 660 might be a stretch but I wasn't meaning 50.00 either. All in context. Got a friend over by Dayton that picks up the big ones all the time that need new P&Cs; for say buck and a half.