Purchased an Endurance 50 as a supplemental heat source for my farm house. Heating just fine with oil but want the ability to reduce costs. My house is 2,100 sq. ft. so don't see it as a total replacement. I have a few questions as to the hook up.
* Can I reduce the 10" air system to 8" piping to fit into my existing system
* Can the combustion air flex pipe be run into my crawl space or is it best to draw from the outside
* Anyone have a good cleaning procedure for the unit.
* Can I reduce the 10" air system to 8" piping to fit into my existing system
* Can the combustion air flex pipe be run into my crawl space or is it best to draw from the outside
* Anyone have a good cleaning procedure for the unit.
