i know I have posted before about this but this stove is driving me crazy. It will run well for a bit and once I shut it down to clean it then it will light however an e2 code comes on and shuts down the stove. Any ideas?
Englander pvd 25 keeps giving e2 code
- Thread starter Ribcage
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
Cedarjunki
Minister of Fire
Ash is a very good insulator. Make sure you use a wire brush and clean the back of the firebox in the baffles. Ash buildup can alter the temp reading.
Just a side note.. mine sometimes throws the code as well.. but only when the stove is started from a cold state. It takes alot to heat all that metal up.. i just keep an eye on mine when i start it. If i notice it kicks off i just hit the on button again and its fine
Just a side note.. mine sometimes throws the code as well.. but only when the stove is started from a cold state. It takes alot to heat all that metal up.. i just keep an eye on mine when i start it. If i notice it kicks off i just hit the on button again and its fine
- Status
Similar threads
