Enviro EF2 Heat Exchanger Tubes Cleaning Rod Sticks - Found reason and Fix for 0.14 Cents!!!

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
chrisasst said:
Great info, my ef2 is really hard to pull and push. I guess I will have to try the nut and see if that works. It may not help either that the rod seems to be bent. I haven't taken it out to really check it though.
Click to expand...

Hello chris

My rod was bent also but I straightened it with a hammer. Not perfect but works great. You can also buy a new rod for $29.90 >> http://woodheatstoves.com/heat-exchanger-rod-wknob-p-9854.html

Good Luck.
 
Hello

So the case of NDS - No Nut in the Design Syndrome is closed!
 
Status
Not open for further replies.

Similar threads

Don2222
GC-60 or M55 loose heat exchanger rake out of rack
Replies
3
Views
461
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
Don2222
Weld broke on the Aladdin & heat exchanger tube fell in with smoke came pouring out! Now what?
Replies
13
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
tbear853
tbear853
E
EKO 25 - heat exchange tube help
Replies
18
Views
2K
The Boiler Room - Wood Boilers and Furnaces
JTWALL
JTWALL
B
Removing Jotul F500 stove top for cleaning
Replies
2
Views
3K
Jotul
bee man86
B
Don2222
Enviro EF3 Auger bearing upgrade!
Replies
2
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
vinny11950
vinny11950
Top Bottom
Back