Exhaust Liner Adapter help!

[PutnamJct]

Hey All,
I am doing a full flex pipe reline and ran into a snag.
Original exhaust was 3" and I am going to 4". Nothing that came in my reline kit is even remotely close to fitting, they are all way too big in diameter on the stove end. I have to use the original Quadrafire flange to connect to back of stove.
I found this at home depot:
http://eandata.com/lookup/0050206925522/
Picture here:

It is 26 gauge galvanized steel and would fit perfectly, however I do not know if I can use this for pellet exhaust.
Thoughts?
Thanks,
John

 

[Rock Crusher]

I would not use this galvanized adapter as it will cause bi-metallic electrolysis. Others have taken the piece that will work to your local exhaust system shop and have it fabricated. I am surprised Quad doesn't offer an adapter. Good luck!

 

[mralias]

(broken link removed to http://www.stove-parts-unlimited.com/Quadrafire-1200i-Top-Vent-Adapter-4-p/811-0670.htm)
perhaps one of these?

 

[PutnamJct]

(broken link removed to http://www.stove-parts-unlimited.com/Quadrafire-1200i-Top-Vent-Adapter-4-p/811-0670.htm)
perhaps one of these?

I saw that one, but what's odd is my clamps are on the stove, the one in this link has them on the flange......weird

 

[mralias]

Your right. Mine too. Call them and asked them.

 

[PutnamJct]

I saw that one, but what's odd is my clamps are on the stove, the one in this link has them on the flange......weird

This is what I am trying to connect 4" pipe to:

The diameter of this is slightly less then 3"

 

[PutnamJct]

Your right. Mine too. Call them and asked them.

Thanks for checking, at least I know I'm not nuts LOLOL

 

[mralias]

Could look at this as well. It is made for pellet stoves
(broken link removed to http://www.hardwarestore.com/pellet-stove-pipe-increaser-121694.aspx)

 

[PutnamJct]

Could look at this as well. It is made for pellet stoves
(broken link removed to http://www.hardwarestore.com/pellet-stove-pipe-increaser-121694.aspx)

That looks like it could work...good find!