Hi: I have a free standing propane heat stove that's vented through a conventional block chimney. I noticed while cleaning it that it has a three inch flexible sleeve running through it from top to bottom . I'd like to replace the stove with a wood burning one. Would I have to remove the sleeve? run a stove pipe?
from propane to wood
- Thread starter colbee
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
Most wood stoves require a 6 inch flue; 3" won't be enough. When you have a masonry chimney you don't need stovepipe (or better: only until the wall thimble) but a full and preferably insulated stainless steel chimney liner sized for the stove you are installing. That video may be helpful (no endorsement for the particular product/supplier):
Last edited:
As Grisu stated, the chimneys are typically lined. The requirement for a wood stove exceeds what you have. They are typically 6" with the very large stoves using 8" and rated for solid fuel (wood). Insulated liner is the best solution if possible.
- Status
Similar threads
