okay here it goes, never tried using this kind of thing, my stove was working fine, I vacuumed it out, like you should step by step, now the auger and combustion blower will not work, test only the distribution fan is working. I bought the pressure switch and eps probe, still nothing, I jumped the pressure switch, ( both old and new switch) and the auger works, but still no combustion blower, it spins freely, ive tried everything im loosing my mind, email me directly at [email protected] and respond here I will be back at it after work today. I will test the combustion blower but its so hard to get to the wires, and I just don't feel its the blower, because I had to jump the switch, I don't see a hood switch or door, I don't see any loose wires. i also noticed bottom middle the previous owners of the house took the plastic off this red switch panel with white switches, doesn't seem they do much, i tried different variations, the fuse might be no good, but it doesn't seem to have popped. i took the chain off the auger and emptied the tube. HELP ME my dogs and my wife will appreciate it
!!
!!
