For some reason my P61 has started putting out some 50- 75f more heat on a given setting. 5 should be 450f it's giving off 550ish.1 should be 250 it's 285. I don't mind but will it cook the stove? 7 should be 470, this is based on testing and given temps.
Harman P61 putting out to much heat.
- Thread starter Spaz
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Whitenuckler
Minister of Fire
Have you cleaned the ESP probe lately? Also, you could unplug the ESP probe from the control board and reconnect.
Since the ESP controls the heat, yes it would be a concern as there is no backup for over firing the stove.
Whitenuckler
Minister of Fire
I don't think there is one, as the probe is supposed to be in control. I know there is some control card checking done on power up on the ESP, and you can get a fault. I think the 6 blink means it's got a temperature issue. If you had a new control card I'd say try that.
Similar threads
