Harmom PB 105 Status Light "5"

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
VTJake

VTJake

Member
Hearth Supporter
Mar 10, 2008
19
Vermont
Has anyone had the Status light come on? 5 blinks is the issue I'm having. The manual says that after 40 minutes of not firing this will happen. I reset the boiler and it fires back up.
The boiler was installed this week. What I have is a 40 gallon Boiler Mate Hot water tank with a Taco 4 zone prioity control unit with the Boiler Mate having the priority.

The only time this happens is when the entire system has been satisfied and not calling to replenish the hot water tank.

Anyone's thoughts would be appreciated.

Thanks

Mike
 
Status
Not open for further replies.

Similar threads

M
Adding fossil fuel boiler to wood boiler system with pressurized storage
Replies
1
Views
266
The Boiler Room - Wood Boilers and Furnaces
ewdudley
ewdudley
P
Push water towards boiler or pull from it ?
Replies
9
Views
4K
The Boiler Room - Wood Boilers and Furnaces
chew72
C
Don2222
Harman P61a - 2 blink vacuum status light error??
Replies
4
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
My Dog is Nuts
M
P
Dodging a bullet with my heating system
Replies
0
Views
2K
The Boiler Room - Wood Boilers and Furnaces
peakbagger
P
X
PB-105 6 Blinks
Replies
2
Views
887
The Boiler Room - Wood Boilers and Furnaces
X35PM
X
Top Bottom