I'll be posting again..

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

danielj618

New Member
Hearth Supporter
Dec 9, 2006
52
after this weekend..If I live through it

Picking up that nice big wood furnace I mentioned prior..it is being coaxed out of it's basement home with a wrecker..(tow truck and winch)..probably strapped to a piece of plywood and pulled up and out of a bilco door

I wont have it that easy..It has to come in my breezeway..the into my kitchen through a door..IMMEDIATE right hand turn down a set of cellar stairs that end more or less in the corner of the basement..that means another turn, to the left this time and across the basement to the other end...Oh joy

I will try and take some pictures of this debacle and post them should I survive
 
Be careful and good luck.
 
That does not sound fun. When I got my wood furnace they loaded in my p/u I unload and moved into place with help from my 9yr old and a dolly. No stairs.
 
I had to cut my firebox off its floor and cut the heat exchanger off the firebox before it would go down into the basement, and even then it was a PITA.

But good luck! :)
 
DeanB said:
I had to cut my firebox off its floor and cut the heat exchanger off the firebox before it would go down into the basement, and even then it was a PITA.

But good luck! :)

That is a nice avatar:-)

Craig
 
Well..I am alive and the furnace is in the basement.

It was taken up out a set of Bilco doors with a wrecker..that was sweet..dropped into a pickup truck..we drove it to my house and neighbor Joe brought over his backhoe..we took off all the outside tin casing and doors etc..stripped down to the firebox and bottom frame and heat exchanger..picked it up off the truck and set it by the breezeway door..I took the time and vacuumed everything out and blew it off..bucketed it to the side door and through..onto a dolly..up through the kitchen door and turned it to send it down the stairs..two slings and about 30 feet of 3/4" nylon cord..backed the backhoe as far back as we could..sling around the bucket..rope through a window..sling around the furnace..we started her down the stairs and Joe kept tension on the rope..my wife was the signal person up in the kitchen and my brother and I were at the backside helping it down the stairs..it was an unsettling feeling..I knew it was good rope but it was all that was between us eating a 300 or 400 lb furnace..we eased her down..joe eased the backhoe towards the house..and my wife was the go between..the turn at the bottom of the stairs was tricky but we kept easing her down and I pulled her towards the dolly and my brother kept the ass end on the stairs till the last part and she dropped right on

whew

gonna assemble the casings tomorrow and plenums and move towrds wiring it..BUT..we have a christmas tree to cut down and pictures with us and 6 kids for cards..she will be up and running soon

:-)
 
Wow lotta work, but good neighbors are a god send, way to go! Good Luck with the rest of the setup. enjoy the holidays too!
 
Status
Not open for further replies.