Insulation Blanket Replacement

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

xman23

Minister of Fire
Hearth Supporter
Oct 7, 2008
2,674
Lackawaxen PA
This is the insulation blanket in my Jotul Oslo. It is on top of the 2 piece cast iron burn plates. I replaced if about 6 years ago and it a was about $40 Jotul stealer. For the same price I bought a roll, 2' x 10' roll of Kaowool™ RT - 2,300°F / 1,260°C. It is the same insulation material. The piece I needed is 11.5" X 27" X 1/2". I will be able to get 8 pieces out of the roll.

(broken link removed to http://www.anvilfire.com/sales/pages/kaowool_index.htm)

Tom
 

Attachments

  • [Hearth.com] Insulation Blanket Replacement
    Old insulation 20111001-00130.webp
    144.6 KB · Views: 383
  • [Hearth.com] Insulation Blanket Replacement
    New insulation 20111014-00136.webp
    35 KB · Views: 421
Thanks for the link xman.
 
xman23 said:
This is the insulation blanket in my Jotul Oslo. It is on top of the 2 piece cast iron burn plates. I replaced if about 6 years ago and it a was about $40 Jotul stealer. For the same price I bought a roll, 2' x 10' roll of Kaowool™ RT - 2,300°F / 1,260°C. It is the same insulation material. The piece I needed is 11.5" X 27" X 1/2". I will be able to get 8 pieces out of the roll.

(broken link removed to http://www.anvilfire.com/sales/pages/kaowool_index.htm)

Tom

Good find Tom! I saved the link as I think my T-5 has this stuff above the baffle..

Ray
 
I set aside this same link a few months back because I thought I would do the same thing when my insulation blanket needed to be replaced. Thanks for confirming that it will in fact work.
 
Status
Not open for further replies.