I have a Quadrafire Castile pellet stove. I pinched the wires on the convection blower putting it back in. That popped the fuse. Replaced the fuse, fixed the wiring on the convection blower. The stove starts up and runs good, but will shut down when it gets pretty hot, I'm assuming since the convection blower doesn't come on it hit the high limit and shuts down.
I took the control board apart and looked at it and see nothing wrong. Is there anything else I should check?
Bob
I took the control board apart and looked at it and see nothing wrong. Is there anything else I should check?
Bob