Kudos to Mike (Englander) and Andy (AM/FM)

[AddictiveStew]

Just wanted to post my kudos and thanks to both Mike and Andy for putting up with my many (mostly unnecessary) questions over the course of a week, and for providing me this beautiful new EP-25 that I will be hooking up soon! Gotta grab some more pieces to make the 3 foot rise that Englander wants, then we are good to go. I'll post pics once she is all hooked up. Thanks again guys!

 

[AddictiveStew]

I know, pics or it didn't happen.

 

[The Ds]

nice lookin stove!!

 

[imacman]

Congrats on the new stove. I think you'll be very happy with it, and the customer service that Mike & Englander provide is worth it's weight in gold.

Don't forget to pre-burn it now outdoors.....you don't need any pipe attached to do that

 

[St_Earl]

lookin' good!

 

[motorbykemike]

i have some extra pieces in the garage, what do you need ?

i have been thrilled w/ englanders customer and parts support

keep it clean

 

[AddictiveStew]

I'll be needing two 90's, a 3 foot piece and a stove adapter. I originally had a pipe straight out of the wall but I'd like to install per Englander's suggestion. I'm using Duravent so they would have to be the same. Have anything like that?

 

[motorbykemike]

sorry for the delay ,

i do have what you need

i have a new appliance adapter and 3 new 1 footers and 2 used 90's , i do have a used 3 ft also but it may be going into my freinds install / spoken for

you may want a wall bracket on that vert run , i have one if so

if you are thinking of going out the back of the stove through the adapt , into a 90 , you may want to think about putting a cleanout tee instead of the 90 , anyways a tee is better than a 90 if you are going horiz to vert , vert to horiz - use a 90 .

the soot that normally piles up in the 90 in a horiz to vert falls into the bottom of the tee , more betterer

try and put a bit of rise on any horiz also , 1/4", an inch , whatever

most of my 3" is going into another intsall , i need 4 for my basement rig

 

[motorbykemike]

hey, where in pa , i'm near quakertown

 

[stoveguy2esw]

no biggie stew, bottom line , if you don't know the answer already the question is deemed necessary in my mind.

the EP is a solid heater, should serve you well. the unit was designed by a hearth.com member BTW Corie P. when he was working with us, the kid certainly knows how to make heat! Dane Harman has the gifted young man on his team now.

 

[stillersnut]

I agree, cheers to these guys!! I live in South Central Pa. Just purchased a 55-TRPAH from AMFM Energy. Mike and Andy are great guys. They are the reason I felt so comfortable buying my stove. I've owned a Harman wood stove, & Thelin pellet stove but never felt this confident with a purchase! (Installing stove tomorrow, and will post pics) Hope stove functions as well as these two guys do w/there service!

 

[AddictiveStew]

hey, where in pa , i'm near quakertown

Mike,
I'll send you a private message.
Thanks!

 

[jtakeman]

Congrats,

 

[dylskee]

Congrats on the new stove stew! I've been trying to buy one for months now, at least I have it narrowed down to 5 stoves now!!

 

[AddictiveStew]

Yikes! Good luck!

 

[stoveguy2esw]

Congrats on the new stove stew! I've been trying to buy one for months now, at least I have it narrowed down to 5 stoves now!!

well, if you have questions , you know where to find me