Lopi blower removal... What am I missing?

[John-Eddie]

I just can't seem to get the darned thing off! Looking at the installation manual http://annistonfireplaceandpatio.co...ont/lopi/answer/front_blower_instructions.pdf

...it would seem the two screws under the ash lip should be all that's holding it in - but after remoing these, it won't budge.

Ideas?

 

[ToltingColtAcres]

Sledgehammer?

 

[webby3650]

The insert must be leaning forward and putting pressure on the blower. If your stone hearth is somewhat uneven then this is likely the problem. The blower only has 2 - 3/8" bolts. See if you can tilt the stove back a little and relieve the pressure.

 

[Hickorynut]

The insert must be leaning forward and putting pressure on the blower. If your stone hearth is somewhat uneven then this is likely the problem. The blower only has 2 - 3/8" bolts. See if you can tilt the stove back a little and relieve the pressure.

Only two bolts, so I agree with webby, don't know what else it could be. With my stone hearth, I have to watch out for that very thing.....