Making new baffle plate for Arrow 2400

[kevinkevin]

When I purchased a house, it came with an old Arrow stove, model 2400A, but I discovered it doesn't have a baffle plate.

I found a company in Austria selling baffle plates (https://www.downsheating.com.au/baffle-plate-1990-arrow-2400~26259). I contacted them, but they were uncertain if their plate would fit my stove since their model might not be the same as the US model. Therefore, I'm considering making a baffle plate myself.

If anyone has an Arrow stove 2400A, could you let me know the size of the baffle plate and send me a picture of the inside of the stove? I have the manual for the Arrow stove 2400A, but it doesn't include the size of the plate, and I can't figure out how to install the baffle plate.

I'm wondering if I need to use a baffle plate of the exact size, or if it can be slightly smaller or larger?

Thank you.

 

[EbS-P]

Measure it out a make a card board pattern. I’d be tempted to make it out of vermiculite. It doesn’t have to fit tight. Is accept 1/2” gaps at the sides. Anything is better that nothing

https://www.efireplacestore.com/sbi-ac02560.html

 

[begreen]

This thread will provide a visual cue.

Arrow 1800a built 1981 deflector problems

Hi, I don't know why this happened. We have been using this woodstove for about a month. I want to go put wood in it the other day and found the reflector laying off to the side in the firebox. This evening I've cleaned out the firebox and not quite sure how the plate's supposed to go back on...

www.hearth.com