27s are great. I shot IDPA with one. I never got good at it. I was always in the top quarter for accuracy but bottom quarter for speed. I just traded a Gen I G22 for a Gen III G19 with Crimson Trace grips. Sweet!
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Damm straight shooting there StillHead, that's exactly what will happen! Like the guy who was talking about this "440" (that later turned out to be a 460). He got a very small pile of ammo, I got his saw. This is what it looks like today:
![[Hearth.com] MS460 Magnum for $450.00......Should I?](https://www.hearth.com/talk/data/attachments/89/89849-5ac96051ab377360acb178e103c86be5.jpg?hash=LzOlRoeGDh "[Hearth.com] MS460 Magnum for $450.00......Should I?")
![[Hearth.com] MS460 Magnum for $450.00......Should I?](https://www.hearth.com/talk/data/attachments/89/89850-c3aa65d997dca8aec0f3fc6519c5c0e4.jpg?hash=2QBbz5odCA "[Hearth.com] MS460 Magnum for $450.00......Should I?")
I only wish I had taken a before photo, it was a real beater cosmetically and had a big crack in the handle............ this Stihl gray-white paint is real nice. I've only put one coat on the upper surfaces. Picked up a new tank/handle for $88 on ebay, and used top & air covers cheap there too, plus a new 460 ID tag. The piston and cylinder looked fantastic on this saw and it ran (and vibrated) real nice. It was worth it to me to fix it up. I'll have just under $375 into it when I'm done. It will look better than Dex's saw!
So StihlHead, what are you packing these days............ getting a little short on any calibers?
Here ya' go ;-)
(broken link removed to http://washingtondc.craigslist.org/mld/grd/3547198991.html)
I so wish you hadn't posted that link, I'm gettin the itch for another saw, & the 088 is on the list. A C
Guns and chainsaws... now we are into the real interesting stuff!
I am long on .45 ACP and .223 ammo... but if you have some British .303 I could use some for my Enfield. I do not fire it that much though. It has a kick that is hard on my shoulder. I also need a smaller caliber semi-automatic to carry, as the 1911 is a bit large to lug around concealed. I like it for open carry on my thigh though. I want a single action 9mm or 10mm. Now that Obammy is flapping about gun control it is hard to even get into the door at the local gun shops. I will have to hit the next gun show in town.
is that your signature or the local powershop inventory?..
jr!
I AM the local power shop.
Yep, that is right down the road from me, but I need a 088 like I need another hole in my head. For that matter, I am looking at buying a MS362, and I need that like I need another hole in my head. Going to get a MS192c-e though here real soon. That one I can semi justify.
No no no no no no no no no... you simply NEED more chainsaws!
Yes, my precious chainsaws... good they are for us!
I would say that you have a hole in your collection at the low end, the 192 or a 211 type saw would fill that void. Then you have the rather large and glaring hole in the mid range between the 261 and the 660. You simply need a 60 or 70 cc saw, or both! Yes yes yes, a 30-40cc lower end saw, and a 60cc and 70cc saw is the Rx here. Then you will have the holes filled, see?
Yes, my precious chainsaws... good they are for us!
I would say that you have a hole in your collection at the low end, the 192 or a 211 type saw would fill that void. Then you have the rather large and glaring hole in the mid range between the 261 and the 660. You simply need a 60 or 70 cc saw, or both! Yes yes yes, a 30-40cc lower end saw, and a 60cc and 70cc saw is the Rx here. Then you will have the holes filled, see?
No no no no no no no no no... you simply NEED more chainsaws!
Yes, my precious chainsaws... good they are for us!
I would say that you have a hole in your collection at the low end, the 192 or a 211 type saw would fill that void. Then you have the rather large and glaring hole in the mid range between the 261 and the 660. You simply need a 60 or 70 cc saw, or both! Yes yes yes, a 30-40cc lower end saw, and a 60cc and 70cc saw is the Rx here. Then you will have the holes filled, see?
Yeah, I am sure I will have plenty of saws over time. Seems to be a habit of mine, collecting things. Saws, pens, bicycles, guns, star wars lego sets. Think that is all of the "collections" right now. Ah, forgot the old comic book collection and hand carved decoy collection. God help me when I start collecting cars.
My dad collected cars. He even composted them. Literally. When he died, we found 2 buried Caddys in the back 40 that his second wife did not even know about. He had over 20 cars and PUs, and 2 boats. My neighbor here collects old PU trucks. They are completely overgrown with blackberries. I counted over 100 when I walked back there last summer. Even he does not recall how many he has any more.
I had over 20 saws in my collection when I moved here 2 years ago. Then I sold over half of them. More from fear of theft or robbery and I did not have room for them all. Most of them were in boxes. The economy is thawing out and people are not unloading saws like they were 4 years ago. I have not bought any new or used saws in a while. I could get by with just one 026 and a 361. Or even just one 361. My precious! But 2 are more better.
I had over 20 saws in my collection when I moved here 2 years ago. Then I sold over half of them. More from fear of theft or robbery and I did not have room for them all. Most of them were in boxes. The economy is thawing out and people are not unloading saws like they were 4 years ago. I have not bought any new or used saws in a while. I could get by with just one 026 and a 361. Or even just one 361. My precious! But 2 are more better.
I am sure we could all get by with a Home Depot special if we had to. It would not be fun, but we could do it.
Throwing the good stuff in the furnace tonight since it is supposed to be 10 degrees out and I will tell you, nothing like locust/oak/hickory compared to the cherry, sweet gum, and other wood I have been using until this week. Kind of like comparing a Stihl to other saws. Just not much else like it. I could probably get by with sweet gum, poplar, and pine, but who wants to do that unless utterly necessary.
Well Scott, How'd that go? If you had a new saw I would've thought we'd have seen pictures by now....
swagler85
Minister of Fire
You should look into Kahr Arms for a smaller framed sidearm. They build a solid and small framed gun.
Second that on the Kahrs, I have a K9 with the electroless Nickel finish with tritium night sights on it. Its what's by the side of the bed for when I get woke up in the middle of a dark night out here in the country................. My 3 radioactive dots clearly show where I'm aiming. They are DAO though, I think Stilhead was looking for something Single Action.
I passed on it. Too much money for that saw IMHO. I'll wait for the 660....
460 is a very hot saw but compression imo needs to be north of 165 and 190 seems to be the sweet spot. Oh and what the heck are you cutting for? Twin Out door wood burners?
460 is a very hot saw but compression imo needs to be north of 165 and 190 seems to be the sweet spot. Oh and what the heck are you cutting for? Twin Out door wood burners?
Those compression levels (190psi
) do not happen with stock saws. 460 is a very hot saw but compression imo needs to be north of 165 and 190 seems to be the sweet spot. Oh and what the heck are you cutting for? Twin Out door wood burners?
I think Scotty is morphing into MegaOverKill. He is dialing in his wood supply in for a new line of Quadrafire systems: The Quad OWB! Burns through 40 cords a year, keeps his place a nice tropical 85 degrees, heats his new Olympic size indoor pool year round to 80 deg. and his new giant hot tub to 104. A new de-icing hydronic system is being buried under his property to melt any snow that may fall anywhere near his house.
Got ice? Forget about it! A trip to Hawaii will only be a hour or two drive from anywhere in central PA!
- Status
Similar threads
