P
Pallet Pete
Guest
Ok fellow Hearth people throw me what you got please. My wife and I are going to do something with our hearth setup but are really not sure what yet so we would like your ideas. Our current pad was a rush to build something before winter . ( Yes the 2*4 under it are from pallets
) I had a couple of older stoves however we never had a lot of money to build a proper hearth and we used a 1/4" hardy-backer wrapped with tin from Tractor Supply. Until I came to this site I had many misconceptions about heating with wood not the least of which was what a proper hearth should be. Well needless to say I learned a lot and built this pad in order to not burn our house to the ground. I am suprised we did not after all those years with a 1/4" death pad under our stoves.
Any how that is the setup to this current issue. We are debating sliding the current pad to the wall and building up the sides right and left with something. Our idea is to buy / build a new pad that is less space taking and preferably a corner pad and then do the walls with a similar material. What ideas do you guys have ? Anything goes we are not going to do the build till spring now.
THANKS ALL
Pete and Mrs Pete

Any how that is the setup to this current issue. We are debating sliding the current pad to the wall and building up the sides right and left with something. Our idea is to buy / build a new pad that is less space taking and preferably a corner pad and then do the walls with a similar material. What ideas do you guys have ? Anything goes we are not going to do the build till spring now.
THANKS ALL
Pete and Mrs Pete