Pacific Energy Aftermarket blower by Blaze King

[EatenByLimestone]

https://www.amazon.com/dp/B07K52MRCM/?tag=hearthamazon-20


Many, like myself, didn't want to pay $269 for a blower. I've made blowers for 2 stoves out of pancake fans due to this.

Tonight I found a blower listed for Pacific Energy stoves for $149. I'm hoping, marketed by Blaze King, it'll be a long lived purchase.

Figured I'd pass it on, I know there were others that wanted a blower on their PE too.

 

[Highbeam]

https://www.amazon.com/dp/B07K52MRCM/?tag=hearthamazon-20


Many, like myself, didn't want to pay $269 for a blower. I've made blowers for 2 stoves out of pancake fans due to this.

Tonight I found a blower listed for Pacific Energy stoves for $149. I'm hoping, marketed by Blaze King, it'll be a long lived purchase.

Figured I'd pass it on, I know there were others that wanted a blower on their PE too.

It’s “to fit” blaze king and PE. Does not look to be built by the blaze king stove company. Might be fine.

 

[EatenByLimestone]

If I need to fabricate sheet metal to make it fit I'll post it. Won't be the end of the world. But I'll be a bit disappointed.

 

[velvetfoot]

I got a replacement blower for my insert here:
https://electricmotorwarehouse.com/fireplace-fans-blowers-1/

 

[Hogwildz]

Most all blowers are made by outside sources, and can be found online at other vendors. I don't think any stove manufacturers make their own blowers. Some may be proprietary though through a contract with the actual manufacturer. If you get the info off the ID tag on the blower, and search, you will see what is available, where and at what prices. When I replaced the original Summit's blower, I found it was a Fasco make & model, and bought it online for less than 1/2 the cost that PE sold it for. Same exact blower, same manufacturer.

 

[john84]

Anyone know where to get an aftermarket for a Jotul?

 

[Hogwildz]

Anyone know where to get an aftermarket for a Jotul?

Get the info off the tag on the blower

 

[Woody Stover]

it was a Fasco make & model

They also make the motors for Buck..

 

[john84]

Get the info off the tag on the blower

I am trying to, so far all I can come up with is Jotuls part #.

 

[MDWOOD]

anyone hav a newish 2015 super 27 and know the part#

is this the right on for a super 27
(broken link removed to https://www.ebay.com/itm/Fireplace-Blower-for-Pacific-Energy-Esteem-Kit-5053-947-Rotom-R7-RB50/400317510031?hash=item5d34c8718f:g:kfEAAOxyDlNTleRl:rk:1f:1&frcectupt=true)

 

[Hogwildz]

I am trying to, so far all I can come up with is Jotuls part #.

Lopi probably assigns their own part number. You'll have to get the actual manufacturer's name & part number off the actual motor housing tag.

 

[EatenByLimestone]

Well, it arrived today. 2 wires, both black with miniscule writing on them telling awg, etc. I wonder if it matters which one is given the hot lead. I suppose I should call Fasco on that one. I'm surprised there isn't a ground.