Pellet Co-op. I have pellets so call.

[kinsmanstoves]

I have been getting some good shipping rates to some areas of the east coast. If you can say yes to the following I might be able to help you.
1.) You want good pellets..... Hardwood, great density, low ash
2.) receiving location is a commercial establishment capable of unloading a 53' foot van trailer SAFELY in under 45 minutes. The driver will not help unload and he does not bring a fork lift.
3.) Must take 22 tons, 22 skids of 50 forty pound bags that are shrink wrapped and weather bagged. DO NOT LEAVE THEM OUTSIDE
4.) Payment must clear before shipped.
5.) Want to save money over Lowes, Home Depot, or other companies out to gouge you.

I do have a few loads available so first come first serve.

Eric
330-448-0300

 

[Rickster]

Sounds like some of us should put together a group purchase?
Otherwise, when my wife isn't looking, I could clear out the basement, order the full shipment, and claim the prize as the numero uno pellet pig of all time!

 

[jtakeman]

Sound very tempting, But I could only store 1 more ton. Unless I store them outside. HMMM!

jay

 

[kinsmanstoves]

Sound very tempting, But I could only store 1 more ton. Unless I store them outside. HMMM!

jay

"Build it and they will come."

Eric

 

[jtakeman]

Sound very tempting, But I could only store 1 more ton. Unless I store them outside. HMMM!

jay

"Build it and they will come."

Eric

I do have a friend that has a half empty warehouse, Going to have to call her. The wheels are turning.

jay

 

[cncpro]

e-mail Eric.

Hey Rickster, how far are you from 06241 ?

 

[geek]

Eric,

You may want to post the exact brand so peeps can take in consideration, a pic or two also helps....

..

 

[Rickster]

cncpro,

Unfortunately, I'm about two hours away according to Google maps.

 

[hossthehermit]

I have been getting some good shipping rates to some areas of the east coast. If you can say yes to the following I might be able to help you.
1.) You want good pellets..... Hardwood, great density, low ash
2.) receiving location is a commercial establishment capable of unloading a 53' foot van trailer SAFELY in under 45 minutes. The driver will not help unload and he does not bring a fork lift.
3.) Must take 22 tons, 22 skids of 50 forty pound bags that are shrink wrapped and weather bagged. DO NOT LEAVE THEM OUTSIDE
4.) Payment must clear before shipped.
5.) Want to save money over Lowes, Home Depot, or other companies out to gouge you.

I do have a few loads available so first come first serve.

Eric
330-448-0300

Is it required to be a COMMERCIAL establishment? Or just a forklift available? Flatbed or box trailer?

 

[imacman]

Eric,

You may want to post the exact brand so peeps can take in consideration, a pic or two also helps....

..

Eric only sells ProPellet

http://www.fiberby-products.com/products/wood_pellets.php

 

[kinsmanstoves]

Eric,

You may want to post the exact brand so peeps can take in consideration, a pic or two also helps....

..

Please look at my signature. I only deal in ProPellet. There is no other brand that comes close.

Eric

 

[kinsmanstoves]

I have been getting some good shipping rates to some areas of the east coast. If you can say yes to the following I might be able to help you.
1.) You want good pellets..... Hardwood, great density, low ash
2.) receiving location is a commercial establishment capable of unloading a 53' foot van trailer SAFELY in under 45 minutes. The driver will not help unload and he does not bring a fork lift.
3.) Must take 22 tons, 22 skids of 50 forty pound bags that are shrink wrapped and weather bagged. DO NOT LEAVE THEM OUTSIDE
4.) Payment must clear before shipped.
5.) Want to save money over Lowes, Home Depot, or other companies out to gouge you.

I do have a few loads available so first come first serve.

Eric
330-448-0300

Is it required to be a COMMERCIAL establishment? Or just a forklift available? Flatbed or box trailer?

I will not send to a residential area. Some farms will work but I think you need to call me.

Eric
330-448-0300

 

[webbie]

Please keep the private conversations and back and forths to PM's.

It is OK to announce availability, but not to have a long thread back and forth dealing with them - I think it clogs up the board.

Interested folks should call, email or PM.

 

[Tony K]

I'm interested if this works out as long as it can be a reasonable driving distance from 06374. In the meantime I will look to see if I can find a dropoff point as well as a forktruck. Thanks Eric....

Jay, how much you charge for storage!

Tony

 

[orangecrushcj7]

Anyone in Northern Worcester county MA interested? I don't want to coordinate it, (don't have a facility) but would may be interested in getting in on one if the price is right

 

[jtakeman]

I'm interested if this works out as long as it can be a reasonable driving distance from 06374. In the meantime I will look to see if I can find a dropoff point as well as a forktruck. Thanks Eric....

Jay, how much you charge for storage!

Tony

Tony,

I called my pal, He's enlarging his business so I'm out. Darn it, He had a fork lift and inside storage. Even a loading dock if we could use it.

I tried.

jay

 

[kinsmanstoves]

Still taking orders so give a CALL 9am till 5pm EST.

Eric
330-448-0300

 

[Cincinnati Kid]

I called you last week. You advised you would check on a freight rate to Cincinnati and call me the next morning.

I never heard back from you so am buying direct from a manufacture. At least they f/u with potential customers.

 

[kinsmanstoves]

I called you last week. You advised you would check on a freight rate to Cincinnati and call me the next morning.

I never heard back from you so am buying direct from a manufacture. At least they f/u with potential customers.

I am sorry I did not get back to you.

You could have sent a PM, called, or e-mailed. I do have other business then working on one load of pellets, I SHOULD have gotten back to you, again I am sorry but please contact me prior to making a post about my mistake. Once in a while a customer will be missed. As I said I am sorry and wish I could have worked with you.


Eric
330-448-0300