We just bought a used pellet stove yesterday and we will need to run piping through our existing chimney. This is because the chimney is a larger diameter and it has a cracked lining. What and where is the cheapest stuff to buy for pellet stove exhaust?
piping through existing chimney?
- Thread starter eastcoast413
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
We also did a chimney reline all the way
up and out, and used 4" simpson duravent from a local
fireplace dealer. I did a google search for
the parts we needed, and there was no cost
savings that I could see. Spent roughly $400
for all piping. At best, if you have a few dealers
in the area, get quotes from more than one.
up and out, and used 4" simpson duravent from a local
fireplace dealer. I did a google search for
the parts we needed, and there was no cost
savings that I could see. Spent roughly $400
for all piping. At best, if you have a few dealers
in the area, get quotes from more than one.
- Status
Similar threads
